|
OPERATION
First of
all from the tray the ampoules are loaded to the infeed
conveyor . The infeed conveyor belt is a endless pvc belt
which carries the ampoules towards the labelling section
with the help of feed worm. The infeed worm picks the
ampoules and transfers the same by keeping pre determined
space between two ampoules to the rotating starwheel. The
starwheel carries the ampoules and moves towards the label
applicator. A sensor for sensing ampoule is fitted before
the label applicator which senses the ampoules and in turn,
servo motor allows the label applicator to release one label
which gets sticked on the ampoule. One label sensor is
provided in the machine which senses the gap between two
labels. This ensures that only one label is applied to the
amopoule at a time. Once the label gets sticked to the
ampoule it passes through the pressing belt where the labels
gets properly pressed without giving any crease. After this
the ampoules are guided to the out feed tray where the
ampoules are collected and taken for the next operation.
SALIENT
FEATURES
 |
Complete cGMP model
|
|
|
Three output speed model
available of 120 ampoules/min, |
|
|
240 ampoules/min & 400
ampoules/min. |
|
|
S.S. 304 construction |
|
|
Accurate label placement |
|
|
Servo based system
(Depending on Speed) |
|
|
PLC system
|
|
|
Rotating control panel for
the convenience of the operator. |
|
|
Easy change over.
|
|
|
Easy for cleaning &
maintenance.
|
BASIC
MACHINE
|
|
Imported gear box with
motor for machine
|
|
|
A.C. Frequency drive for
machine
|
|
|
Servo motor
|
|
|
PLC system
|
|
|
Imported sensor for
container & label.
|
|
|
Inbuilt speed indicator &
counter
|
MACHINE SPECIFICATIONS
|
Model No. |
: |
ATAML-400 |
|
Production rate
|
: |
Up to 400 Ampoules / Min |
|
Electrical supply
|
: |
2 HP
|
|
Power requirement |
: |
220 Volts, Single, Phase 50Hz |
|
Height of Conveyor |
: |
Adjustable from 800 to 850 MM
|
|
Dimensions
|
: |
1500MM(L) X 1840 MM (W) X 1350 MM (H) |
|
Net weight |
: |
450 KGS. (Approx.) |
|
Gross weight
|
: |
600 KGS. (Approx.)
|
|
INPUT SPECIFICATIONS |
|
|
|
Label height |
: |
10 mm to 90 mm |
|
Label length |
: |
12 mm to 90 mm |
|
Gap between two labels |
: |
Min. 3 mm |
|
Label roll diameter |
: |
300 mm max. |
|
Label roll core diameter |
: |
75 mm to 76 mm |
|
Container diameter |
: |
5
mm to 38 mm |
| |
|
